Automatically Conserving Energy (Sleep Mode); Manually Switching To Power Save Mode; Power Supply - Konica Minolta BIZHUB C353P User Manual

3
3.2.5

Automatically conserving energy (Sleep mode)

If no operation is performed for a specified length of time, the machine automatically enters a mode where it
conserves energy.
This is the Sleep mode.
Although the machine conserves more energy in Sleep mode than in Low Power mode, the machine must
warm up when Sleep mode is canceled to begin printing again, therefore taking more preparation time than
Low Power mode.
As the factory default, the machine enters Sleep mode after 20 minutes.
Note
When a print job is received, the machine recovers from Low Power mode and begins printing after it
has finished warming up.
The Sleep mode can also be canceled by pressing any key in the control panel.
!
Detail
The length of time until the machine enters Sleep mode can be changed. For details, refer to "System
Settings" on page 10-16.
3.2.6

Manually switching to Power Save mode

Power Save mode can be manually specified from the control panel.
If "Immediately" is specified for "Entering Power Save" on the control panel, this machine stops all the
functions. However, the machine automatically returns from the Power Save mode when the control panel is
operated or data is being sent.
3.2.7

Power supply

Be sure to turn off the machine if it is not to be used for a long period of time, for example, overnight.
In order to ensure that no energy is being consumed, unplug the machine.
3-18
Before using the machine
bizhub C353P