Important Information; Safety Information; For Safe Use; Regulation Notices - Konica Minolta BIZHUB C353P User Manual

Authentication unit (Biometric type AU-101)
16 Authentication unit (Biometric type AU-101)
16.1

Safety information

16.1.1

Important information

When using the authentication unit (biometric type), observe the following precautions in addition to "Safety
information" on page 2-3.
- Authentication unit (biometric type) is optional. It is sold or permitted to use as it is.
- This product is designed, manufactured and intended for general business use. Do not use it for
applications requiring high reliability and which may have an extreme impact on lives and property.
(Applications requiring high reliability: Chemical plant management, medical equipment management
and emergency communications management)
- Use with other authentication devices is not guaranteed.
- In order to incorporate improvements in the product, the specifications concerning this product are
subject to change without notice.
16.1.2

For safe use

7 CAUTION
When using the authentication unit (biometric type), observe the following precautions.
% Do not this product near water, otherwise it may be damaged.
% Do not cut, damage, modify or forcefully bend the USB cable. A malfunction may occur as a result of a
damaged or cut USB cable.
% Do not disassembly this device, otherwise it may be damaged.
16.1.3

Regulation notices

USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users)
FCC: Declaration of Conformity
Product Type
Product Name
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
• This device may not cause harmful interference, and this device must accept any interference received, including
interference that may cause undesired operation.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interface by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
bizhub C353P
Authentication Unit (Biometric Type)
AU-101
16
16-3