Konica Minolta BIZHUB C353P User Manual page 446

12
4
Remove the staple cartridge holder.
– Pull the staple cartridge holder toward you to remove it.
5
Raise the shutter of the staple cartridge holder, and then
remove one sheet of staples.
6
Return the shutter of the staple cartridge holder to its original position.
7
Insert the staple cartridge holder, sliding it along the rails in the
compartment.
– Check that the staple cartridge holder is securely inserted
as far as possible.
8
Close the front door.
Reminder
If stapling still cannot be resumed, even after performing the above procedure, contact your service
representative.
12-42
Troubleshooting
bizhub C353P