Registering Users - Konica Minolta BIZHUB C353P User Manual

Authentication unit (Biometric type AU-101)
14
Click [Install].
15
Click [Finish].
PageScope Data Administrator Bio Plugin is installed, and the setup is completed.

Registering users

!
Detail
In order to register users with PageScope Data Administrator, this device must be connected to the
USB port of the computer, and the computer and the machine must be connected over a network.
Note
When the machine is turned off, then on again with the power switch, wait at least 10 seconds to turn
the machine on after turning it off. The machine may not operate correctly if it is turned on immediately
after being turned off.
Hold the plug when plugging and unplugging the USB cable, otherwise the cable may be damaged.
Reminder
Do not connect other USB devices to the same port where this device is connected. If enough USB
power is not provided, this device may not operate correctly.
When using a USB hub, be sure to use a self-powered USB hub that can provide 500 mA or more.
After connecting this device, wait at least 5 seconds before operating it.
bizhub C353P
Network
C353P
USB
Computer This device
16
16-11