Alert Notification - Sanyo KATANA LX User Manual

Adjusting the Alert Volume
You can set the alert volume separately from the ringer volume
setting.
1.
Press > Settings > Sounds > Volume >
Advanced....
2.
Select Alarms, Text Message, Picture Msg, or
Voicemail.
3. Using the navigation key, select Separate Vol.
4.
Press the navigation key right or left to choose a volume
level and press Done (left softkey).
You can make the ringer vibrate at any volume level by
Tip
checking Always Vibrate .

Alert Notification

Set your phone to alert you with an audible tone when you
change service areas, a call has been connected, there are
messages, or your network signal is fading as well as once a
minute during a voice call.
1.
Press > Settings > Sounds > Alerts.
2.
Select Beep Each Minute, Out of Service, Connect,
Signal Fade/Call Drop, or Messaging.
3.
Use your navigation key to select a setting and press
Silence All
The Silence All option allows you to mute all sounds without
turning your phone off.
To activate Silence All:
With the phone open, press the volume key down repeatedly
in standby mode. (The screen will display "Silence All.")
To deactivate Silence All:
With the phone open, press the volume key up repeatedly
to select a volume level.
.
Section 2B. Settings 33