Turning Your Phone On And Off; Using Your Phone's Battery And Charger - Sanyo KATANA LX User Manual

Turning Your Phone On and Off

Turning Your Phone On
Press .
Once your phone is on, it may display "Looking for service."
When your phone finds a signal, it automatically enters standby
mode. At this point, you are ready to begin making and
receiving calls.
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated.
When a signal is found, your phone automatically returns to
standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also initiate a
search for service by pressing any key (when your phone is
turned on).
The Power Save feature conserves your battery power
Tip
when you are in an area where there is no signal.
12 Section 2A. Phone Basics
Turning Your Phone Off
Press and hold
powering down animation on the display screen.
Your screen remains blank while your phone is off (unless the
battery is charging).
Using Your Phone's Battery and
Charger
Use only manufacturer-approved batteries and
WARNING
chargers with your phone. The failure to use a
manufacturer-approved battery and charger
may increase the risk that your phone will
overheat, catch fire, or explode, resulting in
serious bodily injury, death, or property
damage.
for two seconds until you see the