Using Call Guard - Sanyo KATANA LX User Manual

Using Call Guard

Your phone has two ways of alerting you when you are roaming off
the home network: the onscreen roaming icon and Call Guard. Call
Guard makes it easy to manage your roaming charges by
requiring an extra step before you can place or answer a roaming
call. (This additional step is not required when you make or receive
calls while on the home network.)
Call Guard is turned off by default on your phone.
Note
Voice dialing and speed dialing are not available when
you are roaming with Call Guard enabled.
To turn Call Guard on or off:
1.
Press > Settings > More... > Roaming >
Call Guard.
2.
Select On or Off.
To place roaming calls with Call Guard on:
1.
From standby mode, dial 1 + area code + the seven-digit
number and press .
2.
Press to proceed while the pop-up message is displayed.
– or –
Press any key to delete the pop-up message, and then
press Options (right softkey) > Roam Call.
To answer incoming roaming calls with Call Guard on:
1. Press . (A message will be displayed notifying you
that roaming charges will apply.)
2.
Press to proceed while the pop-up message is
displayed.
– or –
Press any key to delete the pop-up message, and then
press Options (right softkey) > Answer.
If the Call Guard feature is set to On , you need to take
Note
extra steps to make and receive roaming calls.
Section 2D. Roaming 55