Checking Phone Status Using Asr; Asr Options - Sanyo KATANA LX User Manual

Checking Phone Status Using ASR

You can use ASR to obtain information about your phone:
My Phone Number
Network
Signal Strength
Battery
Status (all of the above except phone number)
1. Press and hold
2. If you hear "Say a command," say "Check."
3.
If you hear "Which status item?," say a command.

ASR Options

To change ASR confirmation:
1.
Press and hold
2.
Press Settings (right softkey) > Confirmation and select
an option.
Automatic to ask for confirmation only when the
system is not sure what you said.
Always Confirm to always ask for confirmation.
Never Confirm to never ask for confirmation.
80 Section 2H. Voice Services
or .
or .
To adapt the system to your voice:
1.
Press and hold
2. Press Settings (right softkey) > Adaptation >
Adapt Voice.
3.
Press Start (left softkey) and repeat each word, phrase, or
telephone number you hear.
To reset the adaptation, select Reset Voice on the step 2
above.
To change ASR mode:
1. Press and hold
2. Press Settings (right softkey) > Modes and select an
option.
Expert Mode to sound a beep only.
Prompt Mode to prompt for required information.
Readout Mode to prompt for required information
and to read aloud the content displayed on the main
screen.
To change ASR dialing region:
1.
Press and hold
2.
Press Settings (right softkey) > Dialing Region and
select an option.
or .
or .
or .