Using The Phone Charger - Sanyo KATANA LX User Manual

Charging Your Battery
Charge your battery as soon as possible so you can begin using
your phone.
Keeping track of your battery's charge is important. If your
battery level becomes too low, your phone automatically turns
off, and you will lose any information you were just working on.
For a quick check of your battery level, glance at the battery
charge indicator located in the upper-right corner of your
phone's display screen. If the battery charge is getting too low,
the battery icon ( ) appears and the phone displays a
warning message.
Always use a manufacturer-approved desktop charger, travel
charger, or vehicle power adapter to charge your battery.

Using the Phone Charger

1.
Plug the phone charger into a wall outlet.
2. Open the micro-USB connector cover located on the upper
left side of your phone.
3.
Plug the other end of the phone charger into the micro USB
connector.
A red indicator light means the battery is charging.
A green indicator light means charging is completed.
14 Section 2A. Phone Basics
With the manufacturer-approved Li-Ion battery, you can
recharge the battery before it becomes completely run down.
You can also charge your phone's battery with a USB
Note
cable (not included). Simply plug one end of the USB
cable into your phone and the other end into a free USB
port on your desktop or laptop computer.
If your battery is completely run down, it cannot be
charged via the USB cable.