Error Codes And Diagnostic Codes - Invacare Pegasus Operating Manual

10 kph 4 wheel electric mobility scooter
Hide thumbs Also See for Pegasus:
Table of Contents

Advertisement

6.5

Error Codes and Diagnostic Codes

Blink
code
1
Battery must be
charged
2
Battery voltage too
low
3
Battery voltage too
high
Fault
Consequence
for the Scooter
Continues to
drive
Stops driving
Stops driving
Comments
The batteries are discharged. Charge the
battery as soon as possible.
The batteries are depleted. Charge
batteries.
If you switch the Scooter off for a few
minutes, the battery can often recuperate
to such a stage that a short journey is still
possible.
The battery voltage is too high. If the
battery charger is connected, disconnect
it from the Scooter.
The electronic system charges the
batteries when running downhill and
when braking. This fault is caused when
the battery voltage becomes too high
during this process. Switch the Scooter
off and on again.
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents