Celsius/Fahrenheit Temperature Display; Energy Saving Guide - EdgeStar AP13000W Owner's Manual

Celsius/Fahrenheit
Temperature Display
EdgeStar Portable Air Conditioner
With the air conditioner operating in any function mode, press the
Timer button and set the desired time delay OFF hours (from 1 to
12 hours) by pressing the + and – buttons. Once the delayed switch
off timer is set, press the Timer button to confirm the setting. The
symbol and the delay countdown timer will appear on the control
panel display. When the delay time set has elapsed, the air
conditioner switches off. To cancel the delayed switch off function,
press Timer button until symbol disappears on the display.
Press the C°/F° button on remote control ONLY to change the
temperature measurement between Celsius and Fahrenheit.

Energy Saving Guide

Read and follow the guide below to get the best performance and
efficiency from your portable air conditioner:
 Do not cover the air outlet (exhaust) while in use.
 Do not place the unit in front of curtains or drapes- to ensure
they do not obstruct the air intake.
 Minimize the length of the exhaust hose.
 Make sure the exhaust hose is as straight as possible and avoid
kinks or bends.
 Keep curtains, blinds or drapes closed during the sunniest part
of the day.
 Use the timer to operate the unit before it is needed. For
example, set the timer to turn on the unit in cooling mode for 3
or more hours to cool the room before you arrive. You may want
to operate the unit all day if you live in a warmer climate.
 Minimize the heat sources (direct sunlight, computers, servers,
people, etc.) in the room.
 Close all windows and doors.
 Use the unit in a contained room. For example, a room with four
walls and a ceiling, instead of a partitioned studio, or
warehouse.
 Make sure the unit is on a level surface.
 Minimize the amount of humidity in the room. For example, run
the unit as a dehumidifier.
 To prolong the compressor's life, please wait at least 3 minutes
before turning the unit back on after shutting it off.
 Inspect and keep the pre-filters clean by cleaning regularly.
 Perform routine maintenance.
12