Hand Held Products 4600g User Manual page 146

H - Histogram Stretch: Increases the contrast of the transmitted image. Not
available with some image formats.
0H No stretch (default)
1H Histogram stretch
I - Invert Image: Used to rotate the image around the X or Y axis in fixed
mount applications where the imager is mounted upside down.
1IX Invert around the X axis (flips picture upside down)
1IY Invert around the Y axis (flips picture left to right)
IF- Noise Reduction: Used to reduce the salt and pepper noise.
0IF No salt and pepper noise reduction (default)
1IF Salt and pepper noise reduction
Note: You may enable the Salt and Pepper Noise Reduction option if you have
firmware with a base number of 31205122-064 or greater. Refer to the
Show Software Revision
firmware revision in your unit.
IR - Image Rotate:
0IR Image as snapped (rightside up) ( default )
1IR Rotate image 90 degrees to the right
2IR Rotate image 180 degrees (upside down)
3IR Rotate image 90 degrees to the left
J - JPEG Image Quality: Sets the desired quality when the JPEG image
format is selected. Higher numbers result in higher quality, but larger files.
Smaller numbers result in greater amounts of lossy compression, faster
transmission times, lower quality, but smaller files. (Default = 50)
n J Image is compressed as much as possible while preserving quality
factor of n ( n = 0 - 100)
0J worst quality (smallest file)
100J best quality (largest file)
K - Gamma Correction: Gamma measures the brightness of midtone values
produced by the image. You can brighten or darken an image using gamma
correction. A higher gamma correction yields an overall brighter image. The
lower the setting, the darker the image. A setting of 100 results in no
adjustment to the image. The optimal setting for text images is 50K.
0K Gamma correction off (default)
50K Apply gamma correction for brightening typical document image
n K Apply gamma correction factor n ( n = 1-255)
8 - 4
on page 11-2 for information on determining the
4600g, 4600r, 4800i User's Guide