Usb Com Port Emulation - Hand Held Products QUICK CHECK 890 User Manual

Note: Please review the file, readme.htm, in the install location prior to running
the QCID.
Connect the QC890 Verifier to the host as shown in the illustration below.
1
2

USB COM Port Emulation

Scan the following bar code to program the QC890 Verifier to emulate an RS-
232-based COM Port. After connecting the QC890 Verifier and upon successful
installation of the USB driver, the driver will use the next available COM Port. All
QC890 Verifiers that have been configured for USB COM Port emulation use this
host assigned port number. USB COM Port Emulation is the default interface for
the QC890 Verifier.
* USB COM Port Emulation
Note: No additional configuration (e.g., baud rate) is necessary.
2 - 2 Quick Check® 890 User's Guide