Kenwood BL620 series User Manual

●
Use your blender for soups, Only use the appliance for its
sauces, drinks, pâtés, intended domestic use. Kenwood will
mayonnaise, dressings etc. Use not accept any liability if the appliance
your mill (if supplied) for milling is subject to improper use, or failure
herbs, nuts and coffee beans. to comply with these instructions.
before using your Kenwood before plugging in
appliance Make sure your electricity supply is
●
Read these instructions carefully the same as the one shown on the
and retain for future reference. underside of the machine.
●
Remove all packaging and any
Important – UK only
labels.
●
The wires in the cord are coloured
safety
as follows:
Blue = Neutral,
●
Allow all liquids to cool to room
Brown = Live.
temperature before placing them
●
The appliance must be protected
in the blender.
by a 3A approved (BS1362) fuse.
●
Switch off and unplug:
● ● before fitting or removing parts
Note:
● ● after use
●
For non-rewireable plugs the fuse
● ● before cleaning.
cover MUST be refitted when
●
Keep hands and utensils out of the
replacing the fuse. If the fuse cover
blender when it's on the power
is lost then the plug must not be
unit.
used until a replacement can be
●
Don't touch the sharp blades.
obtained. The correct fuse cover is
●
Never let the power unit, cord or
identified by colour and a
plug get wet.
replacement may be obtained
●
Never use a damaged machine.
from your Kenwood Authorised
Get it checked or repaired: see
Repairer (see Service).
'service'.
●
If a non-rewireable plug is cut off it
●
Never use an unauthorised
must be DESTROYED
attachment.
IMMEDIATELY. An electric shock
●
Never leave the machine on
hazard may arise if an unwanted
unattended.
non-rewireable plug is
●
When removing the blender or mill
inadvertently inserted into a 13A
from the power unit:
socket outlet.
● ● wait until the blades have
●
This machine complies with
completely stopped;
European Economic Community
● ● don't accidentally unscrew the
Directive 89/336/EEC.
goblet or mill jar from the blade
before using for the first
unit.
time
●
Never run the blender empty.
1 Wash the parts: see 'cleaning'.
●
Always unplug your blender
when not in use.
●
Only operate the blender with the
lid in place.
●
Do not let infirm people use the
appliance without supervision.
●
Do not let children use or play with
the appliance.
key 4 Put your ingredients into the
goblet.
blender
5 Clip the filter
filler cap ●
The filter has two sieve sizes to
locking lid
filter out any fibrous or
filter
unprocessed ingredients when
goblet
pouring.
sealing ring
●
Turn the filler cap to change the
blade unit
sieve size selected over the spout
base
area
speed + pulse control
6 Fit and lock the lid by turning
power unit
clockwise
mark on the lid lines up with the ▲
cord storage
mark on the jug. The blender
mill (if supplied)
will not operate if the lid is
mill jar
not fitted or not locked
correctly.
to use your blender
7 Place the blender onto the power
unit and turn clockwise to lock
1 Fit the sealing ring - ensuring
8 Select a speed.
the seal is fully located under the
rim of the blade unit.
Leaking will occur if the
seal is damaged or not
fitted correctly.
2 Clip the blade unit into the base
.
3 Screw the goblet onto the blade
unit.
recommended speed chart
speed usage/food items
1
Frothing milk
Light mixes e.g. batters, milkshakes,
scrambled egg
2 - 3
Soups
Thicker mixes e.g. sauces, pâtés
Mayonnaise
Smoothie drinks
Place the fresh fruit and liquid ingredients in
first (includes yoghurt, milk and fruit juices)
Then add ice or frozen ingredients (includes
frozen fruit, ice or ice cream)
(P)
Operates the motor in a start/stop action. The
pulse
pulse will operate for as long as it is held in
position.
Ice crushing
to the lid .
.
- ensure that the ▼
.
max. quantity
1 litre
1 litre
1.6 litres
3 eggs + 450ml
oil
800ml liquid
6 cubes