KETRON X1 Owner's Manual page 66

- Registration
- Pattern
- Custom Syles
- Sound (Sound, Wave, Smp)
- Text
- User Voice
- User Drum
To select the type of file simply press the corresponding function key and the Display automatically
supplies the directory of the Files pre-selected.
DELETE:
This function is used to delete files on Disk. Likewise for all said above for the Disk Load opera-
tions, the Delete function may be Single or Multiple and may be performed from the main direc-
tory or in a more selective manner, section by section by means of the File Choice function.
To delete:
first select the file using the Value + / - keys (Select for multiple selection)
1
press Delete – F6.
2
The display will request further confirmation. Press F10 – Execute to confirm the
3
cancellation or F5 - Exit to exit.
RENAME:
To change the name of the file. The renaming may be performed individually.
To rename a file:
select the file using the Value + / - keys. The file may be selected from the general directory
1
or from the pre-selected section using the File Choice function.
Press Rename – F7.
2
Write the new name using the keys from C 2 to F5 and moving the sector using the
3
Cursor < > keys.
FOLDER: the Folder menu (F8) enables the display and editing of the Folders stored on Hard Disk.
The folder is selected by means of the 0-9 Select keyboard.
- New: (F1) the New function enables the creation of a new Folder. To do this, simply write the name of
the new Folder and confirm using key F10 – Execute.
- Delete: (F2) global cancellation of the Folder.
To delete, select the Folder concerned (which will become black) using the Value + / - keys and
press F2 – Delete.
The display will request the user to confirm the operation twice before allowing the Folder to be
effectively cancelled with key F10 – Execute. To cancel the operation press F5 – Exit.
Warning: the Delete Folder operation permanently cancels all the Files stored in the Folder.
Before performing the operation it is advisable to carefully evaluate if there are any files to be recove-
red, copying them onto another Folder of Floppy Disk.
- Rename: (F3) Folder renaming function. Write the new name and confirm using key F10
– Execute.
- Lock: (F4) the Lock function allows the user to enable a safeguard against accidental Folder canceling
or modifications. The Lock function makes it impossible to Delete or Rename a Folder.
To enable the safeguard select the file using the Value +/- keys and press F4 – Lock.
To disable the safeguard press Lock once again while the Folder concerned is activated.
63