Keyboard Controls; Soundbank Autoloading; Key Velocity; Power On Set Up - KETRON X1 Owner's Manual

KEYBOARD CONTROLS

The X series has been designed to meet the most demanding requirements of a live performance
and therefore has been implemented with a large number of keyboard controls that may be easily
activated by the user while playing in order to better control the expressiveness of the music.

Key Velocity

The instrument is equipped with a keyboard of 61 semi-weighted keys with Dynamics and After
Touch control. 6 Dynamic Curves are available: Soft 1, Soft 2, Normal, Hard 1, Hard 2, Fixed.
To change the dynamic response of the keyboard:
1 – Press key F 3 to gain access to the UTILITY Menu.
2 – The F10 key is pressed repeatedly to scroll the various types of dynamic Curves available.
The SOFT 2 curve is that set as the default parameter and the FIXED 127 curve corresponds to
dynamic cut-out. If the dynamic curve is to be changed permanently, this may be done using the
Power On Set Up function (see below). If on the other hand the activation of a different dynamic
curve is required only temporary, the Registration function may be used.

Power On Set Up

The function is used to change some original keyboard settings so that when the instrument is swit-
ched on the new values set by the user are always available.
The parameters that may be saved in the Power On Set Up mode are:
Style Custom/Factory (led) Portamento time
Style Bank A/B (led)
Pattern (led)
1 Touch (led)
Global transposer
Split point
Reverb Level
Harmony type
Dynamic Curve
Global Tune
To save the new Set Up:
Press the Save / Enter key.
1
Press the F3 key - Power On set Up.
2
Press key F10 - Save to confirm the entry.
3
The Default function - F9 is used to restore the original Power On conditions set by the manufacturer.
4

SOUNDBANK AUTOLOADING

This function allows you to load a Sound Bank when the instrument is switched on.
Press Disk
1
Select the folder containing the SoundBank you wish to load
2
Select the first file of the Soundbank
3
Press the Save/Enter button. A new configuration file called INITXX.PWR will be saved
4
onto disk, which contains all the information on the Sound bank.
Go back to the main display screen and Press the Save/Enter button
5
Press F3 Power On Setup
6
Equalizer
Separate Out Assignment
Accordion Mode
Lower 1 Hold
Lower 2 Hold
Lower Lock
Bass Lock
Pianist Sustain
Swell to right
16
Chord Mode
Dynamic Arranger
Autocrash
Pedalboard Font 1-2 text lyric
Bass to Lower 4 switch mode
Reverb Lock
Sync time
Canali Gm Tx-Rx
Sustain 2nd voice
Arabic mode
1