KETRON X1 Owner's Manual page 6

lowing measures:
Turn the radio or TV antenna in a different direction.
1.
Modify the instrument's position with respect to the receiver.
2.
Increase the distance between the instrument and the receiver.
3.
Connect the instrument's plug to a different outlet to make sure that the instrument and
4.
the receiver are connected to two different circuits.
If necessary, contact a specialised technician.
5.
WARNINGS
After having read the safety precautions and instructions on the previous pages, carefully read and
conform to the following recommendations:
POWER SUPPLY
Before connecting this instrument to any other equipment (amplifier, mixer, other MIDI
instruments, etc.) make sure that all units are switched off.
Read the instructions about Radio and TV interference.
HOW TO CLEAN THIS INSTRUMENT
Use only a soft and dry cloth to clean the external surface of your instrument.
Never use petrol, thinners or solvents generally speaking.
OTHER PRECAUTIONS
If you wish to use your instrument abroad and if you have any doubts about the power supply,
contact a qualified engineer previously.
The instrument should never be subject to strong vibrations.
Never exert excessive pressure on the keys and knobs.
Do not place any objects on the central display. The transparent panel could brake or be
damaged and the reading of data could become more difficult.
The instrument's cover could be slightly heated during playing. This is caused by heat
dissipation of its internal components and is considered to be a normal effect.
Nonetheless the instrument should be placed in a ventilated area, if possible.
IN ORDER NOT TO LOOSE DATA
Please remember that the data stored in the instrument can be deleted at any time in case of
abnormal running conditions. We therefore advise to carry out back-up copies of your data
during the various programming phases.
.
.
3