User Voices; To Program A User Voice - KETRON X1 Owner's Manual

USER VOICES

The User Voice section enables the user to modify and customise the sounds of the X series thanks
to a sophisticate editing program.
The 128 User Voices are divided into families, just like the standard Voices and located in Bank 1
(Bank 2 as we will see is assigned to the Drawbars, the Samples and the. Wave files.

To program a User Voice:

Select the Voice to be modified. The Voice may be a pre-existing Voice of the manufacturer
1
or even a standard Voice selected from the 256 voices of the 2 Banks (in the second
hypothesis the User key must remain off).
Press the Edit Voice key (F 7). The following will appear on the display:
2
The sound Edit function includes the controls of the ADSR
(Attack, Decay, Sustain, Release, Level, Resonance, Cut Off),
the Effects, the controls with Aftertouch and Wheel, LFO
and dynamics control.
Access is gained to the 4 Edit Voice pages using the Page
< > keys.
ADSR / FILTER - the controls of the ADSR are selected
using the F1 – F5 keys . The curve of the ADSR is
displayed at the centre of the Display. Use the F 6 and F 7 keys to select the 2 Filter controls,
Resonance and Cut Off.
Using the Value < > keys the value of each part is modified.
EDIT VOICE EFFECTS - As for the Effects , using the Value < > keys the various pre-set
Effects combinations may be selected and using the
Cursor < > keys the contents of the Effects or the
Effects combination to be edited are viewed.
For a better understanding of the possibilities of the Effects
section of the instrument and for the list of all the kinds of
Effects available we advise you to refer to the EFFECTS chap-
ter (Page. 22). Once the individual Effect to be edited has
been selected using the Cursor, the Value keys are used to
scroll all the versions of the Effects, User inclusive.
Then again with the Cursor < > keys access may be gained to
the boxes below in which the Volumes of the various Effects selected are located: the value of the Volume
may be modified using the Value < > keys .
EDIT VOICE AFTERTOUCH - WHEEL
This part of the Edit section enables the user to assign
some functions to the User Voice that may be controlled
by means of the Aftertouch of the keyboard or by means
of the Wheel Modulation or both.
Use the Cursor < > keys to scroll all the options foreseen
for Aftertouch and Wheel. Using the Value < > keys ,
On / Off is selected.
Cut Off: controls the opening and closing of the filter.
8