Front Left - Sony HDC1500 Series Operation Manual

Do not insert/remove the "Memory Stick" when the access lamp lights.
m)MENU SEL (menu select) knob/ENTER button (rotary encoder)
Used to select settings from menus displayed on the viewfinder screen (by rotating the knob) and to
confirm settings (by pushing the button).
When a camera control unit or a remote control device, such as MSU-900/950 and the RCP-700-series
Remote Control Panel, is connected, the functions of 6 to 9 are controlled from the external control
device and the controls on the camera are disabled.

Front left

a)RET 1 (return video 1) button
The return video 1 signal from the camera control unit is monitored on the viewfinder screen while this
button is pressed. It function the same as the RET1 buttons on the handle and that on the operation
panel on the rear of the camera .
b)MIC 1 IN (microphone 1 input) connector (XLR 3- pin)
Connect a microphone. This connector and the AUDIO IN CH-1 connector on the operation panel on
the rear of the camera are alternately activated with the CH1 input select switch
c)MIC (microphone) power switch +48V: