Table of Contents
Advertisement
Enter/Pause Button
This button selects a highlighted item or completes an entry that you have made. Pressing the
button in the live monitoring mode freezes the current live screen, and the screen
ENTER/PAUSE
displays
. Press the button again to return to the live monitoring mode.
Pressing the button in the playback mode will pause the video, and the screen displays . Pressing
button again in the pause mode goes to the live monitoring mode.
ENTER/PAUSE
In the digital zoom mode, pressing the button enlarges a specific area of the screen. A
on the enlarged screen.
Arrow Buttons
Arrow buttons are used to navigate through menus and GUI. They are also used to control Pan and
Tilt in the PTZ mode, and to move the specific part of the screen that you want to enlarge in the
digital zoom mode.
In the playback mode, the Up-Arrow button selects the next image, and the Down-Arrow button
selects the previous image. Pressing the Left-Arrow button plays video backward at high speed.
Pressing the button again toggles the playback speed from
,
and
speed. Pressing the button again toggles the playback speed from
displays
,
and
Entering Playback mode from Live Monitoring mode can be user password protected.
Shuttle Ring
The Shuttle Ring functions in the Playback mode. The Shuttle Ring is spring loaded and returns to
the center position when released. When you release the ring, it snaps back to the center position
and the video pauses. Turning the ring clockwise plays video forward. Turning the ring
counterclockwise plays video backward. Playback speed varies with the amount the ring is turned.
The playback speeds are x0.5,
Jog Dial
The Jog Dial functions when playback video has been paused. By turning the jog dial clockwise,
you can play video forward image-by-image. By turning the jog dial counterclockwise, you play
video backward image-by-image.
The Jog Dial also can be used to change numerical values such as IP addresses, date/time and page
during the system setup.
Turning on the Power
Connecting the power cord to the DVR turns on the unit. The unit will take approximately 60
seconds to initialize.
respectively. Pressing the Right-Arrow button plays video forward at high
respectively.
,
,
, x0.5, ,
Four-Channel Digital Video Recorder
,
and
. The screen displays
,
and
,
and
displays
. The screen
.
13
Advertisement
Table of Contents
