Table of Contents
Advertisement
User Guide
Verizon FiOS Router (Model 9100VM)
13.2.4.2 WAN PPPoE Properties—Settings
If you selected Settings in the left submenu, the following screen will appear. This screen allows you to select the
Router's WAN Ethernet port on the rear of the Router for connection to another VDSL2 device, through which you
will connect to the Internet. Click the link labeled Underlying Connection.
If you clicked Underlying Connections, the following screen will appear. Select Ethernet from the WAN Interface
drop-down list.
IMPORTANT: When Ethernet is selected as the WAN interface port, the VDSL2 port on the rear of the Router
will not be used. (By factory default, the VDSL2 is the active WAN interface port.)
030-300239 Rev. A
96
March 2008
Advertisement
Table of Contents
