Table of Contents
Advertisement
User Guide
Verizon FiOS Router (Model 9100VM)
13.2.2.8 LAN (NAT) Bridge Properties—Routing
To configure the routing values for the Router's LAN (NAT) Bridge connections, in the Network Connections
screen, click the LAN (NAT) Bridge link. Then, select Routing in the left submenu. The following screen will
appear. Select the desired setting from the Routing drop-down list.
If you selected Basic from the Routing drop-down list, the following screen will appear. The Router will use basic
routing operations for your LAN IP traffic. Click Apply to save the settings.
If you selected Advanced from the Routing drop-down list, the following screen will appear. Use this screen to
configure advanced routing instructions for IP traffic transmitted across your network. If you change any values in
this screen, click Apply to save the settings. To add a new Route, click the New Route link.
030-300239 Rev. A
85
March 2008
Advertisement
Table of Contents
