Installing The Router In A Cabinet; Installing The Router On Workbench - Huawei Quidway R2600 Series Installation Manual

Installation Manual
Quidway R2600/3600 Series Modular Routers
Installing it in the cabinet
Placing it on the workbench

4.2.1 Installing the Router in a Cabinet

R2600/3600 series have been designed according to the size of the standard 19-inch
cabinet, and their dimensions are respectively:
Quidway R3680, R3680E: Width x height x depth = 440mm x 86mm x 400mm
Quidway R2630, R2630E, R2631, R2631E, R3640, and R3640E:
Width x height x depth = 440mm x 43mm x 400mm
Quidway R2620, R2621: Width x height x depth = 440mm x 86mm x 300mm
As shown in Figure 4-2, the flow for installing the router is as follows:
Step 1: Check the grounding condition and secureness of the cabinet. Secure the
bracket to both sides of the front/rear panel of the router.
Step 2: Place the router on one of the trays in the cabinet. Move the router to a proper
position along the guide rail in the cabinet. Leave an appropriate space between the
router and guide rail.
Step 3: Screw the bracket to the fixed guide rail at both sides of the cabinet.
In this way, the router is firmly fixed to the cabinet through the tray at each slot in the
cabinet and the bracket of the router.
Figure 4-2 Mechanical installation of the Quidway R26/ 36 series

4.2.2 Installing the Router on Workbench

In most of the cases, you do not have a standard 19-inch cabinet. Then, you can place
the routers on clean workbenches. This is a simple operation. During this operation, the
operator:
Must ensure the stability and good grounding of the workbench.
Must reserve a 10cm for heat-dissipation around the router.
Do not place any heavy object on the router.
4-2
Chapter 4
Installation