Maytag MGD7000AG1 Installation Instructions Manual page 18

Remove hinge and latch
9
Hinge
Using a TORX® T25 ® screwdriver, remove the 3 TORX® screws
securing the latch plate and latch backing plate and the
5 screws holding the hinge assembly in place.
9. Reinstall inner door assembly
9
: 9 Bottom
of door
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
8. Reinstall hinge and latch on
opposite sides
Using a TORX ® T25 ® screwdriver, reinstall the latch plate, latch
backing plate, and hinge assembly on the opposite sides from
which they were removed.
Using a TORX ® T25 ® screwdriver, remove the 4 screws on the
dryer. Insert the tabs on the hinge into the mounting slot and
slide down to engage the top tab. Secure in place with the
4 TORX ® T25 ® screws removed earlier.
18