Companion appliance spacing should also be considered. ■ Gas Dryer PRODUCT MODEL NUMBERS MGD6000X, MGD7000X, MGD9000Y * Approx. measurement NOTE: Most installations require a minimum 5" (102 mm) clearance behind the dryer for the exhaust vent with elbow.
INSTALLATION REQUIREMENTS GAS SUPPLY REQUIREMENTS Gas supply This dryer is equipped for use with Natural gas. Dryer can be converted to L.P. gas. When rigid pipe is used it should be 1/2" IPS. When acceptable to the gas supplier and local codes, 3/8" approved tubing may be used for lengths under 20 ft (6.1 m). For lengths over 20 ft (6.1 m), larger tubing should be used.