Aux Setting; Password Setting - Bernee BN-5606XAT1 User Manual

(4) Press iris Open to confirm selection.

3.6.3 Aux Setting

Move joystick to select <AUX>, then press Open to enter the aux menu shown as Fig 3.20.
FIGURE 3.20 AUX
An auxiliary output is a programmable signal from the dome back box that can trigger another
device to operate. An auxiliary output is programmable to trigger from an alarm or from a controller.
An AUX 1 command from the controller will place a ground at the output of AUX 2 to operate the
device that is connected to it.
Setting include: 0~30secs.
An AUX 2 command from the controller will place a ground at the output of AUX 2 to operate the
device that is connected to it.
Setting include: 0~30secs.

3.6.4 Password Setting

Move joystick to select <PASSWORD>, then press Open to enter the password menu shown as Fig
3.21.
This setting protects it from unauthorized changes to the dome settings.
ENABLE PASSWORD:
Open or close the password features.
EDIT PASSWORD(Four Numbers):
Bernee Auto Tracking Dome Camera User Manual
AUX
DWELL TIME<SECS> 1
DWELL TIME<SECS> 2
BACK
EXIT
PASSWORED
EBABLE PASSWORD
<EDIT PASSWORD>
BACK
EXIT
Figure 3.21 PASSWORED
31 / 39
0
0
OFF