Label Position - Bernee BN-5606XAT1 User Manual

Display setup enables you to program how labels are displayed on the monitor. The following labels
are available:
PRESET LABEL: Identifying preset.
ZONE LABEL: Identifying zone.
ZOOM: Identifying zooming times.
AZIMUTH/ELEVATION: Amount of pan from 0°and the amount of tilt from 0°horizontal.
CAMERA LABEL: Identifying dome.
A preset label is displayed when a preset is called. A zone label is displayed when the system
moves into a zone. The zoom ratio label is displayed when zoom is activated. Azimuth/elevation and
direction labels are displayed when pan/tilt is activated. The dome label is displayed when the dome
label is activated.
The following settings are available for each label:
OFF: The label is not displayed when activated.
ON: The label shows when activated.

3.4.2 Label Position

Labels can be placed anywhere on the monitor. This feature enables you to customize the place of
labels on monitor screen.
To set a label position:
Bernee Auto Tracking Dome Camera User Manual
DISPLAY SETUP
PRESET LABEL
ZONE LABEL
ZOOM
AZIMUTH/ELEVATION
CAMERA LABEL
<LABEL POSITION>
BACK
EXIT
Figure 3.3
DISPLAY SETUP
ZONE CAMERA PRESET
SAVE
RESET
AZIMUTH ZOOM
Figure 3.4 Label Position
15 / 39
ON
ON
ON
ON
ON