Table of Contents
Advertisement
Default Setting: tracking setting to default.
Size SNS: the size of the target in the screen, Medium, Large, and Small are selectable
GRAY SNS: the sensitivity of the moving object, Medium, High and Low are selectable
LOST AC: the action when the moving object is lost. Parameters include: return home and tracking,
keep tracking, stop tracking
AUTO ZOOMING: The dome will auto zoom in / out according to the size and distance of the object.
Parameters can be ON/OFF.
WAIT TIME <S>: When the tracking object is lost, the interval of time for the dome to wait before
Lost Action. Parameters can be 5, 10, 15, 20, 25, 30, 35, 40 seconds.
<TRACKING BOUNDARY>: to set the valid area of tracking function (UP/DOWN/LEFT/RIGHT).
Operations:
1. In the menu of Fig 3.30, move joystick to a specific item
2. Press Open
3. Move joystick to select desired parameter
4. Press Open
3.6.12 Tracking Boundary
From the menu in Fig3.30, move the cursor to < TRACKING BOUNDRAY >, press Open to enter
the following menu (Figure 3.31)
Bernee Auto Tracking Dome Camera User Manual
TRACKING SETTING
DEFAULT SETTING
SIZE SNS
GRAY SNS
LOST ACT
TO HOME & TRACKING
AUTO ZOOMING
WAIT TINE<S>
<TRACKING BOUNDARY>
BACK
EXIT
Figure 3.30 TRACKING SETTING
37 / 39
MIDIUM
MIDIUM
ON
40
Advertisement
Table of Contents
