Patterns Setting - Bernee BN-5606XAT1 User Manual

e. After the label is inputted, move the cursor to CE, then press iris Open to cancel and return to the
Preset menu.
(3) Edit preset scene
a. Move joystick to position the cursor beside EDIT PRESET SCENE.
b. Press iris Open.
c. Follow the direction displayed on the monitor.
(4) Clear a preset
a. Move joystick to position the cursor beside CLEAR PRESET.
b. Press iris Open.
c. Follow the direction displayed on the monitor.

3.5.6 Patterns Setting

Use stick to select <patterns> Open to enter the patterns menu shown as Fig3.13.
PROGRAME PATTERN:
A pattern is function that the camera can save its moving course, and will repeat that course when
demanded.
To program a pattern:
(1) Move joystick to position the cursor beside PATTERN NUMBER, and then press iris Open.
(2) Move the joystick up or down to view selections. Press iris Open to confirm selection.
(3) Move joystick to position the cursor beside PROGRAM PATTERN.
(4) Press iris Open.
(5) Follow the directions displayed on the monitor.
After a pattern is programmed, the remaining storage percentage will be displayed on the screen.
This is the amount of memory available to program the remaining patterns.
CLEAR PATTERN:
Bernee Auto Tracking Dome Camera User Manual
PATTERNS
PATTERN NUMBER
<PROZGRSM PATTERN>
<CLEARE PATTERN>
BACK
EDIT
Figure 3.13 PATTERNS
25 / 39
1