Video, Power, Control Line; Cable Connecting; Two Methods For Dome Installation; Dome Switcher Setting - Bernee BN-5606XCAR User Manual

Vehicle speed dome
Table of Contents

Advertisement

4.4 Video, power, control line

RS485 control
Video cable

4.5 Cable Connecting

Outer dome RS485 control line, video cord and power cord have been marked
6-pin aviation plug connecting to cable's 6-pin aviation plug
RS485 control line connecting to keyboard controller and infrared controller, etc.
Video cord connecting to displaying devices
Power cord (note: DC12V) with aviation plug can connect to vehicle lighter in order to be
powered by vehicle (Do care tags of cables or connectors, avoiding wrong match even burnt
out).

4.6 Two methods for dome installation

Method 1: Suck dome onto vehicle roof by owned magnetic plate
Method 2: Referring to the diagram of dome base board in chapter <4.1>, dig 3 holes on vehicle
roof or other board for fixing dome, use three M5 screws mounting dome onto vehicle roof
Note: in fixing with screws, ensure that vehicle roof holes have been waterproofed well, avoiding rain
water flows into the vehicle.

5. Dome Switcher Setting

Dome's own baud rate, communication protocol, address code, etc should comply with practical
setting of customer operation (e.g. keyboard controller).
Two groups of switcher lie in movement board of dome, disassembling square-lid and manual
setting (tweezers for better).
DC12V power cord
7 / 13
®
Bernee
6-pin aviation plug

Advertisement

Table of Contents
loading

Table of Contents