Table of Contents
Advertisement
3.2 Select Language
The language for the on-screen menus is selectable. Available languages include English and
Chinese. The factory default language is English.
Changing the display language:
(1) In main menu move the joystick to position the cursor beside LANGUAGE.
(2) Press iris Open. The cursor moves to the right, beside the currently selected language.
(3) Move the joystick up or down to view selections. Press iris Open to confirm selection. All
on-screen menus are changed into the selected language.
3.3 System Information
Move joystick to select <system information>, press Open to confirm the system information menu
shown as Fig 3.2.
The system information screen shows dome language, protocol, and other configuration
information.
System information settings shown are not changeable in this interface. It is for reference only.
Follow the following steps to display the system information screen:
(1) Move the joystick to position the cursor beside SYSTEM INFORMATION.
(2) Press iris Open.
3.4 Display Setup
3.4.1 Display Setup
Move joystick to select <DISPLAY SETUP>, press Open to enter the display setup menu shown as
Fig3.3.
Bernee Auto Tracking Dome Camera User Manual
SYSTEM INFORMATION
COMM
ADDRESS
PROTOCOL
PRESETS NUMBER
LANGUAGE
TEMPERATURE
BACK
EXIT
Figure 3.2
SYSTEM INFORMATION
14 / 39
9600，N，8，1
255
PELCO-P
256
ENGLISH
36°C
Advertisement
Table of Contents
