Download Print this page

Installing Your Refrigerator - Ariston MTA 4059 NF Instructions For Installation And Use Manual

Two-doors refrigerator-freezer

Advertisement

Available languages

Available languages

Practical Manual about Ariston Refrigerator
In this manual there are some important subjects about the use of your refrigerator been pointed out. By
reading this manual carefully, you can learn new ways of making your refrigerator live longer.
1. Your refrigerator should not be installed at the
outside. It is very harmful for your refrigerator to be
left outside to the effects of outside influences (rain,
sun, etc.).
2. Your refrigerator should be used exclusively by adults
and you should pay attention to the instructions
contained herein.
3. Do not touch it with naked feet or with wet hands.
4. Do not use low quality cable or multiple socket plugs
for the power connection of your refrigerator. Pay
attention that the power connection cable of your
refrigerator is not left under heavy load.
5. In order to unplug the plug from the socket, do not
pull the cable of the plug or your refrigerator. This is
very dangerous.
6. Do not touch the inside units of your refrigerator
with wet hands. Do not put the ice blocks the deep

Installing your Refrigerator

Installing your refrigerator is one of the procedures that affects the performance of your refrigerator
most.
Air Circulation
The compressor and the condenser produce heat when
they are working, so you should create an efficient air
circulation in order to prevent excessive heating. In
order to ventilate the area where you have installed your
refrigerator, there should be a window at the place
which you should open every now and then in order to
provide the necessary air circulation. This will also
guarantee the moisture of the room to drop.
In order for your refrigerator to work efficiently, take
make sure that you do the following:
- If you want to place your refrigerator at a place with a
closed ceiling, you should leave a space of at least 10
cm distance from its top to the ceiling.
- You should leave a space of at least 5 cm distance from
its sides to the wall.
- You should leave a space of at least 5 cm distance
from its back to the wall. You should use the
distance plastics that have been provided for this
purpose.
Protect your refrigerator from direct heat
sources
Do not place your refrigerator at the direct sun shine
and near to heat sources, like ovens.
Installing your refrigerator
Pay attention that the place you install your refrigerator
freezer has produced into your mouth it can stick
and cause permanent ice burns.
7. Before cleaning and maintenance, make sure that
the device is disconnected from the mains. It is
enough if you turn panel setting knob to "
position.
8
If there is a problem with your refrigerator, read the
"Problems and Solutions/Troubleshooting"
chapter before calling the Ariston Customer Services
you can find the solution for a number of problems in
this chapter.
If the problem still prevails, call the Ariston
Customer Services your problem will be dealt with
by the customer services in a short time.
9. If the power cables have been damaged, call the
Ariston Customer Services and ask for them to
replace it with a new cable.
is even and level. If the place you place your refrigerator
is not exactly even, use the legs of your refrigerator and
set them in order to fix your refrigerator and make it
stand secure on the ground.
Grounding
Before you make the power connections of your
refrigerator, control if and make sure that the mains
connection at your home is compliant with the voltage
value specifications that are stated on the data plate at
the inside of your refrigerator. For your own safety, use
grounded connections for powering your refrigerator. If
there is no grounded connection at the electric socket,
we recommend you to call a professional electrician.
Before you connect your refrigerator to the
power connection
After your refrigerator has arrived at your home, keep it
straight and wait for 3 hours. After you have connected
its power cable to the mains connection, let it work for
at least 4 hours before you put any food into it.
Ensure that the power supply voltage complies with the
figures stated on the rating plate inside the fridge
compartment.
The operational voltage of your refrigerator is 220 Volt.
Connect the power cord to a grounded plug bearing a
current rate of 10 Amperes.
11
" (off)

Advertisement

loading

This manual is also suitable for:

Mta 4053 tkMta 4058 tkMta 4059 tk