GE UVD-XP3DNR(-P) User Manual page 14

Figure 10: Motion detection zone setup
Motion options
Off. Motion detection is disabled.
Motion det. Motion detection is enabled, with default motion settings. Enter the
submenu (Figure 11 below) to change the settings (see "Motion detection menu"
below). When motion is detected, the word "Alarm" is displayed on the top left of the
screen, and the image is zoomed, tilted, and panned to the area setup in Setup alarm
zone.
Figure 11: Motion detection menu
Motion detection menu
The Motion detection menu (Figure 11 above) provides the following options:
• Motion Threshold. Set the level of sensitivity of the motion detection.
• Digital zoom. Determine how far in the camera zooms upon alarm. By default, the
camera zooms to the center of the screen.
• Digital pan. Adjust where the camera zooms upon alarm. Move the slider to the
left to pan left, and to the right to pan right.
12 UVD-XP3DNR(-P) Camera User Manual