Copying Functions
Selecting Image Quality
Select image quality suited to the type of original.
The table below shows the quality options.
Image quality mode
Text + Photo
Text
Photo
The procedure for selecting the quality of copies is explained below.
NOTE:
You can adjust the copy exposure in each of the image quality modes. (See Density Adjustment for
Text + Photo Originals on page 6-8, Density Adjustment for Text Originals on page 6-8 and Density Adjustment
for Photo Originals on page 6-9.)
If you select the Photo mode, the manual copy exposure mode is set. (See Adjusting Density on page 4-3.)
4-4
Description
For originals with both text and photographs.
For originals primarily consisting of text.
For photos taken with a camera.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press the image quality mode select key to select
the desired mode.
4
Press the Start key to start copying.
OPERATION GUIDE