Table of Contents
Advertisement
Document Processor
Paper Feeder
Duplex Unit
Document Finisher
The document finisher stores a large quantity of copies and can sort multiple copy sets by shifting the position
of ejection for each one. It can also staple collated copy sets.
OPERATION GUIDE
Automatically scans originals. Also you can perform
duplex copying and split copying.
For document processor operation, refer to Loading
Originals in the Document Processor on page 2-26.
In addition to the cassette(s) provided with the main
body, a paper feeder (with cassettes that can hold 300
sheets each) can be used.
•
The number of sheets that can be accommodated:
300 sheets (standard paper, 64 to 105 g/m²).
•
Paper sizes that can be set are: A3, B4, A4, A4-R,
B5, B5-R, A5-R, Folio, 11 × 17" (Ledger), 8
(Legal), 11 × 8
", 8
1/2
1/2
(Statement), 8
× 13" (Oficio II), 8K, and 16K
1/2
Copy paper can be set in the same way as the standard
cassette provided with the main body. (See .)
IMPORTANT: When lifting and transporting this
machine, be sure to detach the paper feeder in
advance.
NOTE:
•
Left cover 4 is located on the left side of the paper
feeder for use in clearing paper jams.
•
Up to three cassettes can be added for the 18 ppm
model, and up to two cassettes can be added for
the 22 ppm model.
Two-sided copies can be made if the duplex unit is
installed. Two-sided copies of sizes from A3 to A5-R,
Folio, 11 × 17" (Ledger) to 5
8K, 16K, 16K-R (64 to 80 g/m²) can be made.
× 14"
1/2
× 11" (Letter), 5
× 8
"
1/2
1/2
× 8
" (Statement),
1/2
1/2
Appendix-3
Advertisement
Table of Contents
