Duplex Printing Error Detection - Kyocera Mita TASKalfa 181 Operation Manual

Duplex Printing Error Detection

This setting is available if the optional duplex unit is installed. You can select whether or not to display Duplex
disabled Press GO when you select duplex printing and specify a paper type that cannot be used for duplex
printing such as label.
Setting
•
On
•
One-sided printing is performed.
Off
Others
Resource Prot .
Auto Continue
Finishing Error
Finishing Error
Back
Proces. Duplex print
Staple Setting
Duplex Print Process
Back
On
Off
OPERATION GUIDE
Processing
If you select GO, one-sided printing is performed.
If you select CANCEL, printing is canceled.
6
Press the Reset key.
The message display returns to the printer basic
screen.
1
Display the Others screen. (See How to Display the
Others Screen on page 5-45.)
2
Press or to select Finishing Error, and
then press the Enter key.
3
Press or to select Proces. Duplex print,
and then press the Enter key.
4
Press or to select On or Off, and then press
the Enter key.
5
Press the Reset key.
The message display returns to the printer basic
screen.
Printing Functions
5
5-49