Paper Source; Duplex Print Mode - Kyocera Mita TASKalfa 181 Operation Manual

Printing Functions

Paper Source

Set the paper source to be selected first.
Paper Handling
Back
MP Tray Mode
Feed Select
Feed Select
Back
MP Tray
Cassette 1

Duplex Print Mode

Set the binding position on finished prints in duplex printing.
Setting
Short edge bind
Long edge bind
NOTE:
This setting is displayed only if the optional duplex unit is installed.
5-42
Binding at a short edge
Binding at a long edge
1
Display the Paper Handling screen. (See How to
Display the Paper Handling Screen on page 5-41.)
2
Press or to select Feed Select, and then
press the Enter key.
3
Press or to select the desired paper source,
and then press the Enter key.
4
Press the Reset key.
The message display returns to the printer basic
screen.
Output destination
OPERATION GUIDE