Top Tray - Kyocera Mita TASKalfa 181 Operation Manual

System Menu
Auto Low Power Time
Set the time that elapses before the low power mode is automatically activated.
Time that can be set:
Inch Specification— 1 to 240 minutes (in 1 minute increments)
Metric Specification— 1 to 120 minutes (in 1 minute increments)
Machine Default :
Orig. Orient.
Sleep Mode Time
Low Power Time
Low Power Mode Time :
Copy Output Destination
Set the paper output destination with priority for copying.
Setting

Top tray

Finisher
Job separator
NOTE:
This item is displayed only if the optional finisher or job separator is installed.
6-20
: Top Edge
: 1 Min.
: 1 Min.
1 Min. 1-240 Min.
Output tray of main body
Optional finisher
Optional job separator
4
Press the Reset key.
The message display returns to the copier basic
screen.
1
Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
2
Press to select Low power time, and
or
then press the Enter key.
3
Press to select the desired time from 1 to
or
240 minutes [1 to 120 minutes], and then press the
Enter key.
4
Press the Reset key.
The message display returns to the copier basic
screen.
Output destination
1
Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
OPERATION GUIDE