Table of Contents
Advertisement
Set your country
6
(for Australia/New
Zealand customer only)
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
a
Check that the power is turned on by plugging
in the power cord and turn the power switch on.
Press OK.
Set country
Press OK key
b
Press a or b to select your country
(Australia or New Zealand).
Australia
Select ab or OK
c
Press OK when the LCD shows your country.
d
The LCD prompts you to make sure of the
country again.
Australia?
1.Yes 2.No
e
Do one of the following:
If the LCD shows the correct country, press
1 to go to step f.
Press 2 to go back to step b to select the
country again.
f
After the LCD shows Accepted, the machine
will restart automatically. After the restart, the
LCD shows Please Wait.
8
7
Choose a Receive Mode
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
Do you want to use the telephone features of your
machine (if available) or an external telephone or
external telephone answering device connected on the
same line as the machine?
Yes
Are you using the voice message
function of an external telephone
answering device?
No
Do you want the machine to
answer fax and telephone calls
automatically?
Yes
No
Yes
a
Press Menu, 0, 1.
Initial Setup
1.Receive Mode
b
Press a or b to choose the receive mode.
Press OK.
c
Press Stop/Exit.
For more details, see Receiving a fax in
Chapter 6 of the User's Guide.
No
Fax Only
Your machine
automatically answers
every call as a fax.
Fax/Tel
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the phone will
ring for you to pick up
the call.
Manual
You control the phone
line and must answer
every call yourself.
External TAD
Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored
on the external TAD.
Fax messages are
automatically printed.
Advertisement
Table of Contents
