Star Micronics LC-10 User Manual page 89

.
c
Print quadruple-density S-bit graphics
Mode ASCII Decimal Hexadecimal
<ESC>
"Z" nl n2 21 90 nl n2
1B 5A nl n2
Both
ml m2
ml m2 ml m2 .._
Prints bit-image graphics at 240 dots per inch horizontally (maximum
1920 dots wide), skipping every second dot in the horizontal direction.
See < ESC > "K" for other information.
Select graphics mode
Mode 1 ASCII
Decimal Hexadecimal
< ESC > "*" n0 nl
127 42 n0 nl
IIB 2A
n0 nl I
n2 ml m2
I
n2 ml m2
.
I n2 ml m2 I
Selects one of seven graphics modes depending
on the value of n0 and
prints bit-image graphics in this mode. See < ESC > "K" for information
on nl, n2, ml, m2, .
n0 Graphics
mode
0 Normal-density
1 Double-density
2 Double-density, double-speed
3 Quadruple-density
4 CRT graphics, mode I
5 Plotter graphics
6 CRT graphics, mode 11
Convert graphics
density
(60 dots per inch)
(120 dots per inch)
(240 dots per inch)
(80 dots per inch)
(72 dots per inch)
(90 dots per inch)
Mode
ASCII
Decimal Hexadecimal
Both
c ESC > "1" n
m
21 63 n m
1B 3F
n m
Converts graphics defined by subsequent < ESC > "K", < ESC > "L",
< ESC > "Y" or < ESC > "Z" commands to a density mode defined
by <ESC>
"*'*, n is "K", "L", "Y" or "Z", indicating
the mode to be
converted.
m is a code from
< 0 > to < 6 > indicating one of the modes
of <ESC> "*".
c
L
P