Star Micronics LC-10 User Manual page 80

Line feed
Mode ASCII
Decimal Hexadecimal
Both <LF>
10 OA
Prints the current line and feeds the paper to the next line. If DIP switch
l-2 is ON, also moves the next print position to the left margin. See the
preceding commands for the line spacing.
Reverse line feed
Mode ASCII
Decimal Hexadecimal
Both <ESC> <LF> 27 10 IB OA
Prints the current line and feeds the paper in the reverse direction to the -
preceding line. If DIP switch l-2 is ON, also moves the next print position
to the left margin. See the preceding commands for the line spacing.
Ignored when friction feed is used.
Perform one d2764nch line feed
Mode ASCII
Decimal Hexadecimal
Both < ESC > "J" n 27 74 n IB4A n
Feeds the paper once by n/216 inches, where n is between 1 and 255.
Does not move the print position right or left when DIP switch l-2 is
OFF. Does not change the line-spacing setting. Ignored when friction
feed is used.
Perform one d2764nch reverse line feed
Mode ASCII Decimal Hexadecimal
Both 1
< ESC > "i" n
127106 n IlB 6A n
Feeds the paper once by n/216 inches in the reverse direction, where n
is between 1 and 255. Does not move the print position right or left when
DIP switch l-2 is OFF. Does not change the line-spacing setting. Ignored
when friction feed is used.
Feed paper n lines
Mode ASCII Decimal Hexadecimal
<ESC> "f' "1" n 27 102 49 n IB 66 31 n
Both -
<ESC> "f <l> n 21 102
1 n
1B 66 01 n
Feeds the paper n lines from the current line, where n is between 0 and
127.
72