Star Micronics LC-10 User Manual page 85

Set left and right margins
Mode ASCII Decimal
Hexadecimal
Both
<ESC>
"X" rll n2
27 88 nl n2 1B 58 nl n2
Sets the left margin at column IZI and the right margin at column
a?. See
the preceding commands for margin restrictions and other notes.
Carriage return
Mode ASCII Decimal Hexadecimal
Both <CR> 13 OD
Prints the current line and returns the next print position to the left margin.
If DIP switch 1-8 is ON, also performs a line feed.
Set automatic line feed
Mode ASCII Decimal Hexadecimal
IBM
<ESC> '+ "
5
Cl>
27 53 1 1B 35 01
Causes the printer to perform both a carriage return and line feed each
time it receives a < CR > code. This command takes priority over DIP
switch
1-8.
Cancel automatic line feed
Mode ASCII Decimal Hexadecimal
IBM
<ESC> " " 5
co> 21 53 0 1B 35 00
Causes the printer to perform only a carriage return when it receives a
c CR > code. This command takes priority over DIP switch l-g.
Backspace
Mode ASCII Decimal
Hexadecimal
Both CBS>
8 08
Moves the print position one column to the left. Ignored if the print
position is at the left margin. This command can be used to overstrike
or combine characters.