Star Micronics LC-10 User Manual page 73

The first eight of these character sets (from U.S.A. to Spain I) can be
selected as power-up defaults by DIP switches 2-2 to 2-4.
Enable printing of all character codes
1 Mode 1 ASCII
I
Decimal
I
Hexadecimal
I
I
I I
IBM I < ESC > "\" nl n2 I27 92 nl n2 IlB 5C nl n2
Enables printing of all characters in the IBM character set, including those
assigned to character codes which are normally considered control codes.
This command remains in effect for the next nf + n2 x 256 characters,
where
rz~
and
n2
are numbers between 0 and 255. During this interval
no control functions are executed. If a code with no assigned character
is received, the printer prints a space.
Enable printing of a// character codes on next character
Mode ASCII
Decimal Hexadecimal
IBM 1
<ESC> "n"
1 27 94 1B 5E
This command operates like < ESC > "\" except that it remains in effect
for only one character.
Select s/ash zero
Mode 1 ASCII Decimal Hexadecimal
I
<ESC> I'- .' "1" 127 126 49 Both 111, 7E 31
<ESC> 6, 1. - <I> I27 126 1 i1B 7E 01
Causes subsequent zero characters to be overprinted with a slash (0).
Select normal zero
IModel ASCII
I
Decimal
I
Hexadecimal
I
<ESC> .' - 11 "0" 27 126 48 1B 7E 30
Both
<ESC> '*m-' <()> 27 126 0 IB 7E 00
Causes subsequent zero characters to be printed normally (0). without
a slash.
65