Star Micronics LC-10 User Manual page 64

Insulation resistance
Dielectric strength
10 megohms between AC power line and
chassis
Withstands 1 kVAC rms at 50 or 60 Hz
between AC power line and chassis for
at least 1 minute
n Environmental Requirements
Operating temperature
5 to 40°C (41 to 104°F)
Operating humidity
10% to 80% (no condensation)
Storage temperature
- 30 to 65°C (- 22 to 149°F)
Storage humidity
10% to 95% (at 40°C) (no condensation)
n Option
Automatic sheet feeder
n
interface Signals
Pin No.
Signal
Name
Dir&i0ll
Function
1 STROBEIN
Goes from High to Low (for at least 0.5
microseconds) when data are valid.
4
-1 most significant t
4
__I
4
Eight-bit character data. DATA8 is the
-.a*.-.
AA.
bit; DATA1 is the least
-.-.- -.
' g
significant bit. High is logic 1 and Low is
logic 0.
6
IllAlA I 1r
4
4
UT
5-Microsecond Low pulse acknowledges
receipt of data.
BUSY
OUT Low when the printer is ready to accept
data.
PAPER
OUT
I OUT
I
Goes Hi
I ci a_n be. E
h if the printer runs out of paper.
eld Low_permanently by turning
_ -
13 SELECTED OUT
14-15 N/C
16 SIGNAL
GND
17
cGHNADssssIs
DIP switch I-5 ott.
High when the printer is on-line.
Unused
Signal ground.
1 nar grouna.
1 Pr+ter's chassis ground, isolated from sig-
56