Star Micronics LC-10 User Manual page 81

Set fop of page at current position
Mode ASCII
Decimal
Hexadecimal
IBM 1 <ESC> "4"
I 21 52
IIB 34
Sets the current position as the top-of-page position. Note that this can
also be done from the control panel.
Set page length to n lines
Mode ASCII
Decimal
Hexadecimal
Both <ESC> "C"
n
21
61 n
1B 43
n
Sets the page length to
n
lines in the current line spacing, where
n
is between
1 and 127 in Standard mode or between 1 and 255 in IBM mode. Changing
the line spacing later does not alter the physical page length. The current
line becomes the top of the page.
Set page length to n inches
Mode ASCII Decimal Hexadecimal
Both i <ESC> "C" CO>
n 12767 0 n llB4300 n
Sets the page length to
n
inches, where
n
is between 1 and 22 in Standard
mode or between 1 and 127 in IBM mode. The current line becomes the
top of the page.
Set top margin
Mode ASCII
Decimal Hexadecimal
Both 1 <ESC>
"C"
n
1 27 99 n IlB 63 n
Sets the top margin to (n - 1) lines, where n is between 1 and 255. Printing
begins on the nth line on the page. The power-up default is
n
= 1, giving
no top margin.
Set bottom margin
Mode ASCII
Decimal
Hexadecimal
Both I <ESC>
"IV' n
I
27 78
n
IlB 4E
n
Sets the bottom margin to
n
lines, where n is between 0 and 127 in Standard
mode or between 0 and 255 in IBM mode. The bottom margin is reset
when you change the page length.