External Audio Settings [F4] Auxin; Master Effect Settings - Yamaha DTXTREME III Owner's Manual

Reference
Utility Mode [UTILITY]

Master Effect Settings

3
2
1 Switch
Determines whether Master Effect is applied or not to the
entire sound of the DTXTREME III.
Settings off, on
B Type
Determines the Master Effect type.
Details about the Effect types are described
Settings
on page 70.
External Audio Settings
You can set parameters related to audio signals input via the AUX IN/SAMPLING IN jack.
Output Settings
From this display, you can set parameters such as volume
and pan of the audio signals input via the AUX IN/SAM-
PLING IN jack. These parameters are useful, for example,
when playing or practicing along with a CD or other source
connected to the AUX IN/SAMPLING IN jack.
2
1
1 Volume
Determines the output level of the audio signals input via the
AUX IN/SAMPLING IN jack.
Range 0 – 127
B Pan
Determines the stereo pan position of the audio signals input
via the AUX IN/SAMPLING IN jack.
Range L63 (far left) – C (center) – R63 (far right)
C Mono/Stereo
Determines the signal configuration for the audio signals
input via the AUX IN/SAMPLING IN jack, or how the signal
or signals are routed (stereo or mono).
Settings L mono, R mono, L+Rmono, stereo
128
DTXTREME III Owner's Manual
[SF2] MEF
1 5 4
[SF1] OUTPUT
5
3
C Pre
You can set various parameters in order to change how the
sound is affected by the selected Effect type. This parameter
lets you call up the pre-programmed settings of these effect
parameters. Data List booklet for information on the parame-
ters for each Effect preset.
D Effect parameter
The number of parameters and values available differs
depending on the currently selected effect type. Refer to page
72 for details about the Effect parameters. Refer to the sepa-
rate Data List booklet for information on the parameters for
each Effect type.
E PAGE > > > >
This appears when another page can be called up from the
current page. Use the Cursor [M M M M ] or [N N N N ] button to call up
another page.
L mono Only the L channel of the audio input is used.
R mono Only the R channel of the audio input is used.
L+Rmono The L and R channels of the audio input are
mixed and processed in mono.
Stereo Both the L and R channels of the audio input
are used.
D OutputSel
Determines the output jack assignment for the audio signals
input via the AUX IN/SAMPLING IN jack.
Settings See the table below.
4
LCD
L&R+ph OUTPUT L/R and PHONES
Phones PHONES
L&R OUTPUT L/R
Ind1&2 INDIVIDUAL OUTPUT 1 and 2 Stereo (1: L, 2: R)
Ind3&4 INDIVIDUAL OUTPUT 3 and 4 Stereo (3: L, 4: R)
Ind5&6 INDIVIDUAL OUTPUT 5 and 6 Stereo (5: L, 6: R)
Ind1 INDIVIDUAL OUTPUT 1
:
Ind6 INDIVIDUAL OUTPUT 6
E Mic/Line
When using the AUX IN/SAMPLING IN jacks, this deter-
mines the input source, microphone (mic) or line.
Settings mic, line
mic Intended for low output equipment, such as a
microphone, electric guitar or bass.
line Intended for high output equipment, such as a
keyboard, synthesizer, or CD player.
[F4] AUXIN
Output jacks Stereo/Mono
Stereo
Stereo
Stereo
Mono
:
Mono
: