Yamaha DTXTREME III Owner's Manual page 17

■
DTXTREME III Special Set
* First, connect the
RHH135's [PAD] output
jack to the 9HI-HAT jack
on the DTXTREME III,
then connect the
RHH135's [HI-HAT
to 7CRASH1
CONTROL] output jack
to the HI-HAT CON-
TROL jack on the DTX-
to 9HI-HAT
TREME III.
to HI-HAT
CONTROL
DTXTREME III
DTXTREME III
Module stand
(included)
Module stand fastening
screws x 4 (included)
■
Setting up with Acoustic Drums
The DTXTREME III can be played from an acoustic drum kit if the kit is fitted with an optional set of drum triggers (such as
Yamaha DT20 Drum Triggers) and the triggers are properly connected to the input jacks of the DTXTREME III.
PCY135
to 2TOM1
TP100
RHH135
TP120SD
to 1SNARE
*Foot pedal is not included
in the Special Set.
Attaching the module stand
Attach the included module stand to the
DTXTREME III using the module stand
fastening screws.
* Be sure to use the included screws.
PCY155
to 3TOM2
PCY135
TP100
TP100
KP125
to 4TOM3
to 5TOM4
to JKICK/K
Setting Up
to 6RIDE
to 8CRASH2
TP100
DTXTREME III Owner's Manual
17