Effect Settings [F4] Effect; Variation Pan - Yamaha DTXTREME III Owner's Manual

Effect Settings
From the displays called up via the [F4] EFFECT button, you can set the Effect related parameters for the current Drum Kit.
In the Drum Kit mode, you can set the parameters of the Reverb effects, Chorus effects and Variation Effects. The Reverb
and Chorus effects are applied to the entire DTXTREME III sound as well as the Drum Kit sound while the Variation effects
are applied only to the Drum Kit sound. For details about the Effect structure, see page 68.
Effect Connection Settings
This display gives you at-a-glance, overall view of the
effect routing and comprehensive control over the effects.
1 2 8
6 9
1 Variation Effect Category
Determines the Variation Effect Category.
Details about the Effect categories and types
Settings
are described on page 70.
B Variation Effect Type
Determines the Variation Effect Type.
Details about the Effect categories and types
Settings
are described on page 70.
C Chorus Effect Category
Determines the Chorus Effect Category.
Details about the Effect categories and types
Settings
are described on page 70.
D Chorus Effect Type
Determines the Chorus Effect Type.
Details about the Effect categories and types
Settings
are described on page 70.
E Reverb Effect Type
Determines the Reverb Effect Type. You need not select the
Reverb Effect Category because the effect types of the Reverb
block are not divided into multiple categories.
Details about the Effect categories and types
Settings
are described on page 70.
F Variation Return
Determines the Return level of the Variation Effect.
Range 0 – 127
[SF1] CONNECT
7 3 4 K 5
J L M N O
Drum Kit Mode [DRUM KIT]
G Variation To Chorus
Determines the Send level of the signal sent from the Varia-
tion Effect to the Chorus Effect.
Range 0 – 127
H Variation To Reverb
Determines the Send level of the signal sent from the Varia-
tion Effect to the Reverb Effect.
Range 0 – 127
I Variation Pan
Determines the pan position of the Variation effect sound.
Range L63 (far left) – C (center) – R63 (far right)
J Chorus Return
Determines the Return level of the Chorus Effect.
Range 0 – 127
K Chorus To Reverb
Determines the Send level of the signal sent from the Chorus
Effect to the Reverb Effect.
Range 0 – 127
L Chorus Pan
Determines the pan position of the Chorus effect sound.
Range L63 (far left) – C (center) – R63 (far right)
M Reverb Return
Determines the Return level of the Reverb Effect.
Range 0 – 127
N Reverb Pan
Determines the pan position of the Reverb effect sound.
Range L63 (far left) – C (center) – R63 (far right)
O [SF5] BYPASS
Pressing this button toggles the bypass status of all three
Effect blocks (Reverb, Chorus and Variation) between on and
off.
When Bypass is turned off (the BYPASS indication is shown
with white text in black), the Reverb, Chorus and Variation
Effects are applied to the Drum Kit sound. When Bypass is
turned on (the BYPASS indication is shown with black text in
white), one or two or all three of the Effects will be bypassed
for the Drum Kit sound. The box surrounding the bypassed
Effect block (either of C: VAR, C: CHO, and REV) is indi-
cated with a dotted line while the box surrounding the non-
bypassed Effect block is indicated with a solid line.
DTXTREME III Owner's Manual
Reference
[F4] EFFECT
89