Table of Contents
Advertisement
Quick Start Guide
Connecting microphones,
musical instruments, or audio
devices to the built-in mixer
Connection example
Refer to the illustration to connect desired devices, such as a
microphone, or a musical instrument to the input jacks of the
mixer.
Getting sound
1
Connect the plug on the included power
cord to the [AC IN] jack on the rear panel of
this unit.
2
Insert the other end of the power cord into
an AC outlet.
WARNING
To avoid electrical shock and damage to connected devices,
be sure to ground the unit using the included power cord.
18
STAGEPAS 200BTR STAGEPAS 200 Owner's Manual
3
Turn the MAIN [LEVEL] control (red knob)
and channel [LEVEL] controls (white
knobs) to the minimum (zero).
4
Also, set the channel [EQ/PRESET] controls
(green knobs) to the center (FLAT)
position, and set the MAIN [MODE] control
(yellow knob) to the MUSIC position.
5
Set the [MIC, LINE/LINK] switch or [MIC,
LINE] switch to the MIC (N) position for
channels to which a microphone is
connected. Set those switches to the LINE/
LINK or LINE (O) position for channels to
which a musical instrument or audio
device is connected.
Advertisement
Table of Contents
