Click Voice Settings [F2] Voice; Tap Tempo Function [F3] Tap; Groove Check Function [F4] Groove - Yamaha DTXTREME III Owner's Manual

Reference
Click Mode [CLICK]
Click Voice Settings
From this display (available only when the Click Voice is set to "User Voice"), you can set a different Click Voice for each
beat timing.
1
1 Voice category
Determines the voice category for the click sound.
kick1 – 2, snare1 – 3, tom1 – 2, cymbal,
Settings
hihat, perc1 – 2, efct1 – 2, USR-A – H
Tap Tempo function
The Tap Tempo function is described in the Quick Guide section on page 34.
Groove Check Function
Performing the Groove Check
Explanations about this display are described in the Quick
Guide section on page 51.
Performing the Rhythm Gate
Explanations about this display are described in the Quick
Guide section on page 52.
106
DTXTREME III Owner's Manual
2 3
[SF1] G.CHECK
[SF2] R.GATE
B Voice number
Determines the voice number for the click sound. If the voice
number is set to "000," the indication "no assign" is shown for
the voice name and no sound will be produced.
Settings Refer to the separate Data List booklet.
NOTE
• The amount of Voices differs depending on the selected Voice cate-
gory.
C TUNING
Determines the pitch of the Voice specified at
-24.00 – +24.00 (1.0 indicates one semi-
Range
tone.)
NOTE
• A User Voice assigned to a Click Voice will be played back with just
one shot, even if the User Voice is set to "loop" in the Sampling mode.
• When you want to use the Click Voice having a User Voice, it is a
good idea to save the file including your desired User Voice in the
AUTOLOAD folder (page 125) of the USB storage device and use the
Auto Load function (page 125).
Parameter Settings for the Groove
Check and Rhythm Gate
Explanations about this display are described in the Quick
Guide section on page 50.
[F2] VOICE
2
.
[F3] TAP
[F4] GROOVE
[SF3] SETTING